It's unusual for me to have non-GM items in my collection, especially anything as weird as these early 70s Mini Clubman wing trim panels that I came across whilst clearing out my loft.

For sale - Mini Clubman "Woody" trim

To the best of my knowledge they were for the rare early 70s Mini Clubman "woody" estate model.
There was a metal section with the Fablon style faux wood finish, it had sun fading and flaking of the finish on the outer side and some light rust visible on the inner side. There were also two brightwork trim pieces which were in quite good condition, all bright and shiny with no dents, etc.

Mini Clubman trim - bright and shiny with no dents

Given the scarcity of such parts, I wanted these items to go to an enthusiast, rather than the scrap bin. I posted on a few Mini enthusiasts' FaceBook groups and found a buyer in under a week. This has proved to be a much easier process than finding new homes for classic Opel spares, hmm, I'm in the wrong business.

Mini clubman woody estate

On offer is a set of new old stock rear brake shoes, they are manufactured by CBS auto parts and marked up as Box 108. They are listed as suitable for; the Opel Manta A, Opel Ascona A, Opel Kadett B, Opel Rekord C, Opel Commodore A and even the Opel Olympia. Although not listed, I can see no reason why the Opel GT isn't included, as it used the same rear axle as the other cars shown above.

For sale - nos cbs brake shoes for Opel Manta and others

Here is a full list of potential applications as shown on the label:

Opel Kadett 1700  1967-71
Opel Kadett Rallye 1900S  1967-
Opel Olympia 1500, 1700, 1900 1967-
Opel Rekord 1500, 1700, 1900, 2200  1965-71
Opel Rekord Sprint  1964-69
Opel Ascona 1200, 16-19, S, SR  1971-
Opel Manta  1971-
Opel Commodore 2200, 2500, GS, GSE  1967-

For sale - a variety of Opel applications are listed

It is important to note that these parts have a folded section to mate with the handbrake cable and not the hook used on many of the later models. Do make sure that your vehicle has the correct hand brake cable to match, which I believe has ball ends.

Opel brake shoes - note the folded fitting

Unlike the modern equivalents these vintage items normally have a softer compound, which provides great stopping power and doesn't wear your brake drums out so rapidly. Avoid costly MOT failures and restore your vehicle to the way it was when it was new. These are now hard to find items, with just a handful of sets left in stock and I will not be replacing them, so don't hang about if this is what you need for your project.
The asking price is just £20 which even includes delivery within the UK. I can send to some European locations too, but please ask for a quote first.

Send a message or leave a comment below if you have any questions.



On offer are two front brake disks for the Opel Manta A series, they are the original ATE components which were removed from my own car and skimmed on a lathe. Since then they have remained in dry storage for more than two decades.

For sale - Opel Manta A series front discs

One disc has some rust pitting on the outer edge, its thickness is 9.8 mm.

Manta A series front disc - some pitting on the outside edge

The other disc is slightly better and its thickness is 10.4 mm.

Manta A series brake disc - stored for over two decades

I have checked to see if similar items can be purchased on-line through eBay, etc. but it would appear that Opel Manta A series brake discs like these are no longer available from stockist.

Manta A series brake discs - no longer available in the UK

This pair of discs are in good usable condition, perfect for an every day vehicle; being original equipment specification the steel is likely to be more durable than the equivalent pattern parts.

The asking price is £25 for the pair, which includes delivery within the UK. I can send to some European locations too, but please ask for a quote first.

These are now hard to find items, stock is extremely limited and I will not be replacing them, so don't hang about if this is what you need for your project.

Send a message or leave a comment below if you have any questions.


On offer is one new old stock Lucas Girling brand rear brake hose. It is for the Opel Manta & Ascona A series models.

For sale - Opel Ascona A series rear brake hose

The part number is GHP 414, the overall length is 30cm, with female connectors fitted at both ends. The rear of the package states compatibility with the following vehicles:



  • Opel Ascona 1.6 (Rear) 1971-72
  • Opel Ascona 1.9 (Rear) 1970-75

  • For some reason certain variants including the Opel Manta A series are not listed, I can't think of a reason for this; but do check the fittings and length if you have any doubts about suitability.
    Being new old stock, it is in mint condition, the asking price is £15 which includes delivery within the UK. I can send to some European locations too, but please ask for a quote first.

    For sale - Opel Ascona A series rear brake hose

    Avoid costly MOT failures and restore your vehicle to the way it was when it was new. These are now hard to find items, stock is limited and I will not be replacing them, so don't hang about if this is what you need for your project.

    Send a message or leave a comment below if you have any questions.


    UPDATES:

    25/10/15 - Now Sold

    On offer is one new old stock Moprod brand rear brake hose. It is for the early Opel Manta B series, Ascona B series, as well as the other cars based on the same platform, such as; the Vauxhall Cavalier Mk1 models.

    For sale - front brake hose for Opel Manta, Ascona & Vauxhall Cavalier

    The part number is BH248, the overall length is 40cm, with female connectors fitted at both ends. The rear of the package states compatibility with the following vehicles:
    • Opel Ascona, Manta, 1.6S, 1.9, 2.0 - 8/1976-81
    • Vauxhall Cavalier 1976-81
    Being new old stock, it is in mint condition, the asking price is £15 which includes delivery within the UK. I can send to some European locations too, but please ask for a quote first.

    For sale - front brake hose for Opel Manta, Ascona & Vauxhall Cavalier

    Avoid costly MOT failures and restore your vehicle to the way it was when it was new. These are now hard to find items, stock is limited and I will not be replacing them, so don't hang about if this is what you need for your project.

    Send a message or leave a comment below if you have any questions.


    Updates:

    24/02/20 - Now sold

    On offer is one new old stock Supra brand rear brake hose. It is for the Opel Manta, Ascona and Kadett models as well as the other cars based on the same platform, such as; the Vauxhall Cavalier Mk1 and Chevette models.

    For sale - rear brake hose for Opel Manta, Ascona & Kadett

    The part number is MAH 249, the overall length is 28cm, with female connectors fitted at both ends. The rear of the package states compatibility with the following vehicles:
    • Opel Kadett C 1973-79 1.0 & 1.2 (all models) (Saloons from C72615859 & 75106909 & Estates from C72622750 & 75106903 (Rear) )
    • Opel Ascona B, Manta B 1975 - on (Rear)
    • Vauxhall Cavalier 1975 - on (fixed & floating caliper (Rear))
    • Vauxhall Chevette 1975-76 (to GY135596, GX125882 (Rear))
    Being new old stock, it is in mint condition, the asking price is £15 which includes delivery within the UK. I can send to some European locations too, but please ask for a quote first.

    For sale - rear brake hose for Opel Manta, Ascona & Kadett

    Avoid costly MOT failures and restore your vehicle to the way it was when it was new. These are now hard to find items, stock is limited and I will not be replacing them, so don't hang about if this is what you need for your project.

    Send a message or leave a comment below if you have any questions.


    Updates:

    None so far

    Far too often I have been asked for the wiring for the ignition switch on the Opel Manta A series, usually this is the result of miscreants trying to steal a nice example of the Opel Manta A series and today was no exception.
    I really thought that I had run out of stock, but I managed to find one final item example to offer.

    For sale - Opel Manta A series ignition wiring

    It looks as if it has had a modification, but nothing that can't be put back to standard with a couple of minutes work with the soldering gun.

    For sale - Opel Manta A series ignition wiring, modified?

    Updates:

    13/03/20 - Sold

    On offer is a pair of new old stock Opel front mud flaps for the Opel Manta B series and Ascona B series. Made of a creamy white coloured rubber and with no Blitz emblems or other embellishments. Included with the kit are a selection of mounting clamps and full mounting instructions. The part number on the label is 17 18 523.

    For Sale - front mud flaps Opel Manta & Ascona B series

    Being new and unopened old stock, they are in mint condition, the asking price is £15 which includes tracked delivery costs within the UK. I can send to some European locations too, but please ask for a quote first.

    These could be a very nice original accessory for someone with a white coloured vehicle or for a clubman rally car or replica. Obsolete GM spares are not exactly plentiful in the UK, stocks are limited and I will not be replacing them, so don't hang about if this is what you need.

    Send a message or leave a comment if you have any enquiries.


    UPDATES:

    19/11/14 - Sold, but I will check to see if there is further stock, watch this space.
    20/11/14 - YES, 2 more sets located, back in business.
    04/12/14 - Sold Out

    On offer is one brand new "Ascona" script boot lid badge, this type is held in place by two raised spigots which will mate with pre-drilled holes in the bodywork when fitted with tiny plastic inserts. The part numbers for this item are 8 968 927  and 3459304.

    For Sale - Opel Ascona badge - £7.50

    It took me a little research, but as can be seen from the pictures below, this type of boot lid badge was used on the Ascona A series produced from 1970-75. If you have a vehicle of this vintage you may be interested to hear that I also have a new matching "19" badge and a number of used versions of the "SR" script too.
    This is truly a rare badge for what has also become a rare car. As this is new old stock, they are in excellent condition, just the thing to add the icing on the cake to your restoration, or to replace missing or damaged trim. Reasonably priced at £7.50, which includes recorded delivery costs within the UK. I can send to some European / North American locations too, but please ask for a quote first.

    For Sale - all these badges are currently in stock

    Obsolete GM spares are not exactly plentiful in the UK, stocks are limited and I will not be replacing them, so don't hang about if this is what you need.
    Send a message or leave a comment if you have any enquiries.


    UPDATES:

    31/05/15 - One badge has now sold, just one left in stock.
    14/10/17 - All sold.

    On offer are a pair of refurbished cross-member braces, suitable as replacement for those used on the Opel Manta A series and Opel Ascona A series. They are genuine Opel parts and match catalogue part numbers 3 06 000 and 3 06 001.

    For Sale - Manta A series front suspension outriggers

    Both have previously been sand blasted, powder coated and given a top coat of gloss enamel for good measure. I believe the bushings were replaced at the same time, they have no cracks or signs of shrinkage, the metal inserts are clean and rust free. These front suspension outrigger / braces have remained in storage for around 25 years and are therefore in exceptionally good condition. Normally this type of suspension component is usually little more than a rusty mess with dried out bushes and seized bolts. These cross-member braces could be a boon for anyone planning a front suspension rebuild or full nut and bolt restoration.

    Manta A series outrigger - rubber bushes replaced


    Given the rarity and desirability of this all too hard to find parts I have priced them at £60 for the pair, which includes delivery costs within the UK.
    I can send to some European / North American locations, but please ask for a quote first.

    Obsolete GM spares are not exactly plentiful in the UK, stocks are limited and I will not be replacing them, so don't hang about if this is what you need.

    Send a message or leave a comment if you have any enquiries.


    UPDATES:

    11/11/14 - NOW SOLD!

    I planned to list these parts as Opel Manta items, I was convinced these were for the rear control arms, but further investigation of the part number has revealed them to be for the front suspension on the Vauxhall Cavalier Mk 2 and the Opel Ascona C series, positively modern by the standards of this blog, whatever next - listing parts from the front wheel drive era of GM production.

    On offer is a pair of front suspension control arm bushes for the Vauxhall Cavalier Mk 2 and Opel Ascona C series. Made from rubber with the following part number on the inner surface - 90157161.

    You can verify my information here and you will find further details about the equivalent part number 3 52 323 here where there's even an exploded diagram from the factory parts book.  

    For Sale - Vauxhall Cavalier Mk 2 front suspension bushes

    These are new old stock items, in new condition, the asking price is £15 which includes tracked delivery costs within the UK. I can send to some European locations too, but please ask for a quote first.



    UPDATES:

    None so far

    On offer are parts for a large bore rally exhaust system for the Opel Manta B series and Opel Ascona B series. They is no branding but the main resonator box has a label marked "Opel Manta Coupe 2000".

    For Sale - Opel Manta Coupe 2000 big bore exhaust system

    It is made from heavy gauge mild steel, finished in a silk black finish and the overall diameter is 2", I believe the factory fitted exhausts were slightly smaller at 1 7/8". The system comprises; a manifold / downpipe section, a main silencer box with over axle pipe and a rear resonator box with straight tail pipe. Both resonator boxes are fitted with skidded braces to provide additional impact protection to cope with the rigours of fast road and rally driving. The front pipe section has been modified, the original purchaser chose to customise it by incorporating a large cherry bomb silencer. In my opinion, it's all a bit of a dog's dinner and illustrates the dangers of over confidence with a MIG welder.

    Front section - the dangers of over confidence with a MIG welder

    The parts were originally bought for someone's aborted Opel Manta A series custom project, although the markings and configuration lead me to believe that this is an Opel Manta Coupe / Ascona B series system. I know there are small differences between the coupe and hatchback variants, so please study the pictures closely and ask questions if it helps you make certain you are buying the appropriate part.

    For Sale - Opel Manta B big bore exhaust, main silencer

    Given the rarity and desirability of these all too hard to find parts I have priced these parts at £75 which includes delivery costs within the UK. Similar items are listed on eBay for around £180 for a complete system.

    For Sale - Opel Manta B big bore exhaust, rear silencer

    Due to weight and incompatibility issues with left hand drive vehicles this part is only available to UK based buyers.
    Obsolete GM spares are not exactly plentiful in the UK, stocks are limited and I will not be replacing them, so don't hang about if this is what you need.
    Please send a message or leave a comment if you have any enquiries.



    UPDATES:

    19-10-14 Now Sold

    On offer is a sealed beam headlamp, identical to the popular Lucas SB5712 sealed beam unit, used as the inner main beam unit on twin headlight cars. It is specified as a 12 volt 50W 5 3/4" unit with a vintage domed glass front with a 2 pin electrical connector. It is visually the same as the popular Lucas model but manufactured by Thorn.

    For Sale - Lucas 5712 by Thorn.

    So what are the advantages sealed beam units?
    • Reflector will not rust.... no more MOT failures due to low light output or poor beam spread.
    • Glass doesn't get dirty or mist up on the inside.... where you can't clean it.
    • Earth connection is on a spade connector.... doesn't depend on a lamp making good contact with the reflector body.
    • Rubber sealing boot not required.... no hidden gremlins with the electrical connections.

    Sealed beam headlamp - reflector will not rust

    Typical applications for this part include:

    JAGUAR (DAIMLER)
    • MK10 1966-71 main beam
    • XJ6 2.8 1968-73 main beam
    • XJ6 4.2 1971-73 main beam
    • XJ6 4.2 1973-75 main beam
    • Daimler Limousine 4.2 1973-78 main beam

    TALBOT , HILLMAN , SUNBEAM
    • Avenger GL , GT , GLS  1970-76
    • Chamois  1970
    • Hunter GLS  1972-76
    • Imp Sport  1972-75
    • Rapier H120  1970-76
    • Stiletto  1970-71

    LOTUS
    • Esprit 1975-80 main beam

    RELIANT
    • Scimitar GTE 1966-78 main beam

    ROLLS ROYCE
    • Corniche 1971-84 main beam
    • Silver Shadow I 1965-77 main beam
    • Silver Shadow II 1977-80 main beam

    ROVER
    • P6 2000 , 2200 1963-77 main beam

    TRIUMPH
    • Triumph 1500 1973-75 main beam
    • Triumph 1500 , TC 1975-76 main beam
    • Triumph 2000 , 2.5 , Pi 1970-76 main beam
    • Triumph Dolomite 1500HL 1976-81 main beam
    • Triumph Dolomite 1850HL , Sprint 1972-81 main beam
    • Triumph Vitesse 1966-70 main beam

    TALBOT
    • Sceptre 1967-76 main beam

    TOYOTA
    • Celica 1978-81 main beam

    VAUXHALL
    • Cresta PC Viscount 1965-72 main beam
    • Firenza 1971-75 main beam
    • Magnum 1973-76 main beam
    • Ventora FD 1967-72 main beam
    • Ventora FE 1972-76 main beam

    For Sale - fits Firenza, Magnum, Ventora and others

    This part is available for £10 which includes delivery costs, it will be substantially packed for safe arrival.
    Do ask if you are interested in stainless steel M4 retaining screws to replace the awful mild steel original parts; or backing plates, trim rings, beam adjusters or many other similar items I have in stock.


    UPDATES:

    10/12/15 - Now sold

    On offer is a matched pair of chrome style door mirrors, suitable as replacement for the door mirrors used on the Opel Manta A series, Opel Ascona A series, some Opel Rekord C series, Opel Commodore A series and possibly even the Opel GT and Opel Kadett B series. They are Opel branded and constructed from alloy with a glossy hard chrome finish, they have the following part numbers on their bases respectively - 3439461 and 3439462.

    For Sale - a matched pair of chrome style door mirrors

    It will be immediately apparent that these are used items, but given the price that these items now retail at, I can but imagine the wailing and gnashing of teeth if I were to just lob these in the scrap bin, without offering them up for sale first.
    The passenger side mirror has quite a few rust spots on the mirroring (see pictures), the rest of the body is very presentable though. The drivers side mirror has a single spot in the mirroring, the head has a dent at the base and two dings from stones or similar objects, the base is reasonably presentable barring the odd blister or two.

    For Sale - a bargain at £25 for both

    Given the rarity and desirability of these all too hard to find parts, I have priced them at £25 which includes delivery costs within the UK.

    Passenger side - leopard skin rust spots

    If you are looking for a perfect condition brand new matched pair, I can't help you, although you can find them listed on eBay for around £100 a pair. If your budget is meagre, or if you have the skill to change the glass for new, these are the items to buy, for a knock-out price.
    I can send to some European / North American locations too, but please ask for a quote first.

    Driver's side - less rusty, but dented

    Obsolete GM spares are not exactly plentiful in the UK, stocks are limited and I will not be replacing them, so don't hang about if this is what you need.
    Send a message or leave a comment if you have any enquiries.



    UPDATES:

    10/12/14 - Now sold.

    On offer is a single near side / left hand side chrome style door mirror, suitable as replacement for the door mirrors used on the Opel Manta A series, Opel Ascona A series, some Opel Rekord C series, Opel Commodore A series and possibly even the Opel GT and Opel Kadett B series. It is Opel branded and constructed from alloy with a glossy hard chrome finish, it has the following part number on the base - 8968355.

    For Sale - Opel Manta round mirror nearly new condition

    This mirror is so clean I thought it was new old stock at first, but on close inspection I realised it was used but in exceptionally good condition. The mirror glass is very good and the only flaws on the body I can find are; a cluster of tiny blisters on the base and a stone ding on the head section.

    Given the rarity and desirability of this all too hard to find part I have priced it at £25.00 which includes delivery costs within the UK.

    For Sale - mirrored surface is near perfect

    Only the left hand or passenger side (UK) is available, please don't ask about a matched pair in this condition, I can't help you, although you might find them listed on eBay for around £100 a pair. However, if you need a passenger side door mirror for the Opel Manta A series or any of the other vehicles listed above, this is the part to buy, for a knock-out price.

    For Sale - a genuine Opel item

    This will be the driver's side item on European left hand drive vehicles and it may prove to be more popular with European buyers and I can send to some European / North American locations, but please ask for a quote first. 


    UPDATES:

    12/12/14 - Now sold

    On offer is a single door handle for some variants of the Opel Manta B series ('75-'87), Opel Ascona B series and presumably the Vauxhall Cavalier Mk 1 too. It has a plastic body with a glossy hard chrome bright work section, it has the following GM part number on the inner surface 90054838.

    It is a used item, but still in good condition, the asking price is £7 which includes tracked delivery costs within the UK. I can send to some European locations too, but please ask for a quote first.

    For Sale - Opel Manta B series door handle

    Obsolete GM spares are not exactly plentiful in the UK, stocks are limited and I will not be replacing them, so don't hang about if this is what you need.

    Send a message or leave a comment if you have any enquiries.


    UPDATES:

    26/07/15 - Now Sold

    On offer is a single door lock escutcheon for some variants of the Opel Manta B series and Vauxhall Cavalier Mk 1. It has a plastic body with a glossy hard chrome bright work finish, it has the following part number on the inner surface - 09 287 258.

    It is a used item, but still in good condition, the asking price is £5 which includes tracked delivery costs within the UK. I can send to some European locations too, but please ask for a quote first.

    For Sale - Opel Manta B door lock escutcheon

    Obsolete GM spares are not exactly plentiful in the UK, stocks are limited and I will not be replacing them, so don't hang about if this is what you need.

    Send a message or leave a comment if you have any enquiries.

     
    UPDATES:

    19/11/14 - Now Sold

    On offer is a single headlamp, suitable as replacement for the inner (main beam) unit on the Opel Manta A series. Manufactured by Hella, it has the following part number on the glass - 14464 R8 and both the box and the unit are labelled as - 1F3 002 425-011.

    It is designed to accommodate the H1 lamp unit with the single small spade connector and a similar connector for earthing. For UK Manta owners that will correspond to the SR/Berlinetta models and not the base model Deluxe normally fitted with the 1600cc engine.

    For Sale - Main Beam Inner Headlamp Opel Manta A Series

    I appreciate it can be quite confusing with all the different model options on the Opel Manta, especially as many cars will have been modified from their original specification over the years. To clarify matters I have prepared an article, which can be found here
    Changing over to the H1 from the H4 type will require new connectors of the appropriate type; a 5 minute job with a crimp tool if you know your way around electrics.

    For Sale - Hella Headlamp 14464R8

    So what are the advantages of H1 Halogen units?

    Easily upgraded.... the H1 lamp is not only available in the standard 55 Watt output but also uprated 75 watt and 100 watt versions. It is the correct original styled replacement part... so good for Concours competition purists.

    For Sale - Hella Headlamp1F3 002 425-01

    This part is available for £35.00 which includes delivery costs. I will include a very clean salvaged rubber moisture protector boot and it will be substantially packed for safe arrival.
    Do ask if you are interested in stainless steel M4 retaining screws to replace the awful mild steel original parts; or backing plates, trim rings, beam adjusters or many other similar items I have in stock.
    Obsolete GM spares are not exactly plentiful in the UK, stocks are limited and I will not be replacing them, so don't hang about if this is what you need.

    Send a message or leave a comment if you have any enquiries.


    Updates:

    20/10/2017 - Now sold

    On offer is a Weber DGV Carburettor, a type fitted as original equipment to many of the Ford cars of the 1970s. They also make ideal replacements for the temperamental Solex DIDTA carburettor fitted to Opels of the same era.

    Weber DGV carburettor for sale - ideal replacement for a Solex DIDTA

    Unlike the original Solex carburettor, with the Weber DGV model you have full control over the choke for easier cold starting and improved fuel consumption. It is a compound carburettor with a small bore section for economical running and a larger bore which opens progressively for full power when you need it. This combination means that you get the best of both worlds; a boost in both performance and economy too.
    Most importantly spares are relatively cheap and plentiful, making a cinch of servicing and modification. You can even install the Weber DGV carburettors with the original equipment air cleaner, assuming you can source the correct oval adapter plate, which is not included in this sale.

    Weber DGV carburettor for sale - boost both performance and economy too

    I don't know much about the history or parentage of this particular carburettor, it was bought off eBay a while back to keep on the shelf as a spare. It looks like it has had the main gasket and accelerator pump gaskets changed at some point. The body and chokes are clean and grime free.

    I have run a couple of cars with salvaged Weber carburettors in the past and have never had any problems with them. Like the Fords they were originally fitted to, they are; simple, robust and reliable technology and can be re-jetted to suit different engine sizes. I would always recommend getting these units stripped, cleaned and rebuilt before use, but it's your choice.

    Weber DGV carburettor for sale - simple, robust and reliable technolog

    Only the one item is available, it is in fair to good physical condition, all the linkages are present.

    You can still buy this sort of item new for around £200, so I have priced it to sell at £49 delivered to a UK address with easy payment by PayPal. I am located in South London should you wish to inspect and collect it. Obsolete GM spares are not exactly plentiful in the UK, stocks are limited and I will not be replacing them, so don't hang about if this is what you need.

    Send a message or leave a comment if you have any enquiries.

    UPDATES:

    25/08/14 - Under offer
    27/08/14 - Now Sold


    This style of solid metal chrome plated overrider with thin rubber inserts was fitted to the earliest variants of the Opel Manta A series, approximately covering a period running from 1970 through to 1973. The front ones are, to the best of my knowledge, unique to the Opel Manta A series, the rear are shared between the Manta and Ascona A series models. They were fitted to all the UK variants whether they were; Deluxe, Rallye or Berlinetta specification, oddly in Europe they were only fitted to the more upmarket variants.

    On offer is a full batch of salvaged overriders, plus amongst this batch, is one brand new old stock front overrider, read on to find out more about this item. This could be a handy stash, with some items you can use now and other bits to strip for parts and keep or sell on to recoup costs.

    For sale - a full batch of salvaged Opel Manta overriders

    There are no fewer than four used front overriders and three used rear overriders; you can use these to salvage their rubber inserts, which are not included with the new part. Of course there is nothing to stop you getting these parts blasted and re-chromed, which given the scarcity of these items may be a life saver for someone's project.

    The part that everyone will want, is a single completely brand new old stock front overrider, as you would expect, the chrome looks exactly as it did the day it left the factory four decades ago.

    For sale - new old stock Manta chrome overrider, absolutely mint

    They are priced at £35 for the set with easy payment by PayPal, cash on collection will be fine too, the price includes delivery to the UK, other areas subject to an increased charge. I am located in South London should you want to inspect before collection.

    Obsolete GM spares are not exactly plentiful in the UK, stocks are limited and I will not be replacing them, so don't hang about if this is what you need.

    Send a message or leave a comment if you have any enquiries.


    UPDATES:

    25/07/14 - Parts now reserved pending payment
    19/08/14 - No sign of payment yet, so I have added a PayPal button, the first to click wins
    20/08/14 - Now sold

    Blogger news

    Blogroll

    About